Table of Contents
Advertisement
Chapter 4 Tutorials
configure the port settings and IP address on the ZyXEL Device. Traffic should be forwarded to the
port 666 of the Doom server computer which has an IP address of 192.168.1.34.
Tutorial: NAT Port Forwarding Setup
D=192.168.1.34
Thomas may set up the port settings by configuring the port settings for the Doom server computer
(see
Section 11.2 on page 160
Click Network Settings > NAT > Add new rule and configure the screen with the following
1
values:
Service Name
WAN Interface
External Port/s
Server IP Address
Protocol
The screen should look as follows. Click Apply.
2
54
LAN
port 666
for more information).
Doom_Server
Select the WAN interface through which the Doom service is forwarded.
This example uses MyDSLConnection.
Enter 666 as the Start and End port.
Enter the IP address of the Doom server. This is 192.168.1.34 for this
example.
Select TCP/UDP. This should be the protocol supported by the Doom
server.
WAN
A
P-873HNUP-51B User's Guide
Advertisement
Table of Contents
