Table of Contents
Advertisement
Click Maintenance > Remote MGMT > SNMP to open the following screen. Use this screen to
configure the ZyXEL Device SNMP settings.
Figure 126 Maintenance > Remote MGMT > SNMP
The following table describes the fields in this screen.
Table 102 Maintenance > Remote MGMT > SNMP
LABEL
SNMP Agent
Read Community
Set Community
System Name
System Location
System Contact
Trap Manager IP
Apply
Cancel
P-873HNUP-51B User's Guide
DESCRIPTION
Select Enable to allow a manager station to manage and monitor the ZyXEL
Device through the network via SNMP. Otherwise, select Disable.
Enter the password for the incoming Get and GetNext requests from the
management station. The default is public and allows all requests.
Enter the Set community, which is the password for incoming Set requests
from the management station. The default is public and allows all requests.
Enter the system name of the ZyXEL Device.
Specify the geographic location of the ZyXEL Device.
Enter the name of the person in charge of the ZyXEL Device.
Type the IP address of the station to send your SNMP traps to.
Click Apply to save your changes back to the ZyXEL Device.
Click Cancel to restore your previously saved settings.
Chapter 27 Remote Management
249
Advertisement
Table of Contents
