Table of Contents
Advertisement
Note: An interface can belong to only one group at a time.
Figure 87 Interface Group Configuration
The following table describes the fields in this screen.
Table 65 Interface Group Configuration
LABEL
Group Name
WAN Interface
used in the
grouping
Grouped LAN
Interfaces
Available LAN
Interfaces
Automatically Add
Clients With the
following DHCP
Vendor IDs
#
P-873HNUP-51B User's Guide
DESCRIPTION
Enter a name to identify this group. You can enter up to 30 characters. You can
use letters, numbers, hyphens (-) and underscores (_). Spaces are not
allowed.
Select the WAN interface this group uses. The group can have up to one PTM
interface and up to one ATM interface.
Select No Interface/None to not add a WAN interface to this group.
Select one or more LAN interfaces (Ethernet LAN, HPNA or wireless LAN) in the
Available LAN Interfaces list and use the left arrow to move them to the
Grouped LAN Interfaces list to add the interfaces to this group.
To remove a LAN or wireless LAN interface from the Grouped LAN Interfaces,
use the right-facing arrow.
Click Add to identify LAN hosts to add to the interface group by criteria such as
the type of the hardware or firmware. See
information.
This shows the index number of the rule.
Chapter 14 Interface Group
Section 14.2.2 on page 192
for more
191
Advertisement
Table of Contents
