The figure below shows the hardware setup for this tutorial:
Log into the ZyXEL Device's Web Configurator. Go to the Network Settings > HPNA screen.
1
Select Enable in the State field to enable your HPNA port.
2
Connect your ZyXEL Device to the Internet source. This could be either DSL or Ethernet.
3
Connect the ZyXEL Device's coaxial port a coaxial outlet in your house. This relays Internet
4
connectivity to other coaxial outlets in other parts of the house.
In the room where your television is located, connect the HomePNA bridge to a coaxial outlet.
5
Using an Ethernet cable, connect the HomePNA bridge device to the STB. This grants Internet
6
access to the STB.
Refer to the user's guide of your STB for information on how to connect it to your television, as well
7
as configure your account settings on it.
You should now be able to watch online videos in your television using your VOD or IPTV
subscription.
P-873HNUP-51B User's Guide
1
2
3
4
5
Chapter 4 Tutorials
43