Technical Information; Product Maintenance - Chauvet Intimidator User Manual

5. T
ECHNICAL
Product
Maintenance
Page 16 of 18
I
NFORMATION
Dust build up reduces light output performance and can cause overheating. This can
lead to reduction of the light source's life and/or mechanical wear. To maintain optimum
performance and minimize wear, you should clean your lighting products at least twice a
month. However, be aware that usage and environmental conditions could be
contributing factors to increase the cleaning frequency.
To clean the product, follow the instructions below:
·
Unplug the product from power.
·
Wait until the product is at room temperature.
·
Use a vacuum (or dry compressed air) and a soft brush to remove dust collected on
the external surface/vents.
·
Clean all external optics with a mild soap solution, ammonia-free glass cleaner, or
isopropyl alcohol.
·
Apply the solution directly to a soft, lint-free cotton cloth or a lens cleaning tissue.
·
Softly drag any dirt or grime to the outside edges of the external optics.
·
Gently polish the external optics until they are free of haze and lint.
Always dry the external optics carefully after cleaning them.
Do not spin the cooling fan/fans using compressed air because you could damage
it/them.
Intimidator™ Spot LED 150 User Manual Rev. 8