Table of Contents
Advertisement
Configuration
(Standalone)
Sound Active
Mode
Automatic Mode
Page 12 of 21
Set the product in one of the standalone modes to control without a DMX controller.
1.
Connect the product to a suitable power outlet.
2.
Turn the product on.
Never connect a product that is operating in any standalone mode (Static,
Automatic, or Sound) to a DMX string connected to a DMX controller. Products in
standalone mode may transmit DMX signals that could interfere with the DMX
signals from the controller.
Enabling the Sound Active mode:
1.
Press <MODE> repeatedly until SND shows on the display.
2.
Press <ENTER>.
3.
Turn the music on and adjust the microphone sensitivity knob until the product
starts responding to the beat of the music.
The product will only respond to low frequencies of music (bass and drums).
Enabling the Automatic Mode:
1.
Press <MODE> repeatedly until AUTO shows on the display.
2.
Press <ENTER>.
Adjusting the speed of the auto program:
1.
Press <MODE> repeatedly until S-- shows on the display.
2.
Press <ENTER>.
3.
Use <UP> or <DOWN> to adjust the duration of each step of the automatic program
from S__1 (fast) to S100 (slow).
4.
Press <ENTER>.
Mega Trix™ User Manual Rev. 4
Advertisement
Table of Contents
