Table of Contents
Advertisement
Manual Control
Service Menu
Settings Menu Lock-Out
Service Menu Lock-Out
Software Version
Home Screen
Content Send
Q-Spot™ 360-LED User Manual Rev. 4
1. Select MANUAL > DMXvalue.
a. Select PAN, press <ENTER>.
i. Set 000~255 to assign the Pan position.
b. Select TILT, press <ENTER>.
i. Set 000~255 to assign the Tilt position.
c. Select COLOR, press <ENTER>.
i. Set 000~255 to assign the Color Wheel value.
d. Select GOBO1, press <ENTER>.
i. Set 000~255 to assign the Gobo 1 Wheel value.
e. Select GOBO2, press <ENTER>.
i. Set 000~255 to assign the Gobo 2 Wheel value.
f.
Select GOBO2ROT, press <ENTER>.
i. Set 000~255 to assign the Gobo 2 Rotation value.
g. Select PRI&ROT, press <ENTER>.
i. Set 000~255 to assign the Prism value.
h. Select FOCUS, press <ENTER>.
i. Set 000~255 to assign the Focus position.
i.
Select DIMMER, press <ENTER>.
i. Set 000~255 to assign the Dimmer value.
j.
Select STROBE, press <ENTER>.
i. Set 000~255 to assign the Strobe value.
1. Select SERVICE > ACCESS > SETTLOCK.
2. To set the Settings Menu level lock-out, press <ENTER>.
a. Select YES to enable or NO to disable.
b. Press <ENTER>.
1. Select SERVICE > ACCESS > SERVLOCK.
2. To set the Service Menu level lock-out, press <ENTER>.
a. Select YES to enable or NO to disable.
b. Press <ENTER>.
1. Select SERVICE > INFO > VERSION.
a. Press <ENTER>.
1. Select SERVICE > CONTENT > DISPLAY1.
2. Use the <UP> and <DOWN> keys to select the first of 8 characters to show on the
home screen, press <ENTER>.
1. Select SERVICE > CONTENT > SEND.
2. To send Content mode settings in the Q-Spot™ 360 LED to other Q-Spot™ 360
LED products connected via Master/Slave, press <ENTER>.
a. Select YES or NO.
b. Press <ENTER>.
Operation
15
Advertisement
Table of Contents
