Mounting; Orientation; Rigging - Chauvet Q-Spot 360-LED User Manual

Setup

Mounting

Orientation

Rigging

Product Mounting Diagram
10
Before mounting this product, read and follow the
Always mount this product in a safe position and make sure there is adequate room for
ventilation, configuration, and maintenance.
CHAUVET® recommends using the following general guidelines when mounting this
product.
· When selecting an installation location, consider easy access to this product for
operation, programming adjustments, and routine maintenance.
· Make sure to mount this product away from any flammable material as indicated in
the Safety Notes.
· Never mount in places where rain, high humidity, extreme temperature changes, or
restricted ventilation may affect the product.
· If hanging this product, make sure that the mounting location can support the
product's weight. Refer to the
requirements of this product.
· When hanging this product, always secure to a fastening device using a safety cable
(not included).
The Q-Spot™ 360-LED comes with an already installed mounting bracket to which you
will be able to attach the 2 included omega clamps. Use 2 mounting points per product.
In addition, use a safety cable (not included) to link the product to the structure.
Overhead Mounting
Safety Notes.
Technical Specifications
Q-Spot™ 360-LED User Manual Rev. 4
for the weight-bearing
Floor Mounting