Product At A Glance; Safety Notes; Personal Safety; Mounting And Rigging - Chauvet Q-Spot 360-LED User Manual

Before You Begin

Product at a Glance

Safety Notes

Personal Safety

Mounting and Rigging

Power and Wiring

Operation

Expected LED Lifespan

2
Use on Dimmer
Outdoor Use
Sound Activated
DMX
Master/Slave
Please read the following Safety Notes carefully before starting to work with the product.
These notes provide important safety information about the installation, usage, and
maintenance.
This product contains no user-serviceable parts. Any reference to servicing in this
User Manual will only apply to properly trained CHAUVET®-certified technicians.
Do not open the housing or attempt any repairs.
Please refer to all applicable local codes and regulations for the proper
installation of the product.
· Avoid direct eye exposure to the light source while the product is on.
· Always disconnect this product from its power source before servicing.
· Always connect this product to a grounded circuit to avoid the risk of electrocution.
· Do not touch this product's housing during operation because it may be very hot.
· This product is for indoor use only! To prevent risk of fire or shock, do not expose this
product to rain or moisture.
· Make sure there are no flammable materials close to this product while it is operating.
· When hanging this product, always secure to a fastening device using a safety cable
(not included).
· Always carry this product by the handles. Do not carry from the head.
· Always make sure you are connecting this product to the proper voltage in
accordance with the specifications in this manual or on the product's specification
label.
· Never connect this product to a dimmer pack or rheostat.
· Never disconnect this product by pulling or tugging on the power cable.
· Do not operate this product if you see damage on the housing, lenses, or cables.
Have the damaged parts replaced by an authorized technician at once.
· Do not cover the ventilation slots when operating to avoid internal overheating.
· Do not aim this product toward the Sun. The lenses could concentrate the solar
energy and cause internal overheating.
· The maximum ambient temperature is 104° F (40° C). Do not operate this product at
a higher temperature.
· In case of a serious operating problem, stop using this product immediately!
In the unlikely event that your CHAUVET® product may require service, contact
CHAUVET® Technical Support.
LEDs gradually decline in brightness over time, mostly because of heat. Packaged in
clusters, LEDs exhibit higher operating temperatures than in ideal, single-LED
conditions. For this reason, using clustered LEDs at their fullest intensity significantly
reduces the LEDs' lifespan. Under normal conditions, this lifespan can be 40,000 to
50,000 hours. If extending this lifespan is vital, lower the operating temperature by
improving the ventilation around the product and reducing the ambient temperature to an
optimal operating range. In addition, limiting the overall projection intensity may also help
to extend the LEDs' lifespan.
x
Auto Programs
Auto-Ranging Power
x
Supply
P
Replaceable Fuse
P
User Serviceable
P
Duty Cycle
Q-Spot™ 360-LED User Manual Rev. 4
P
P
P
x
x