Table of Contents
Advertisement
4. Operation
Control Panel
Description
Control Options
Programming
Navigation Buttons
DMX Address
DMX Mode
Q-Spot™ 360-LED User Manual Rev. 4
Button
<MENU>
Exits from the current menu or function
<ENTER>
Enables the currently displayed menu or sets the currently
selected value in to the current function
<UP>
Navigates upward through the menu list and increases the
numeric value when in a function
<DOWN>
Navigates downward through the menu list and decreases the
numeric value when in a function
You can set the Q-Spot™ 360-LED start address in the 001~512 DMX range. This
allows for the control of up to 36 products in the 14-channel PERSON1 mode. The
Q-Spot™ 360-LED works with any compatible DMX controller using standard
DMX cables.
Carry out all the programming procedures indicated below from the control panel. Refer
to the
Menu Map
page to learn how the menu options relate to each other.
· To go to an option in the Menu Level, press <MENU> repeatedly until the option
shows on the display. Press <ENTER> to select. This will take you to the first
programming level for that option.
· To select an option or value within the current programming level, press <UP> or
<DOWN> until the option shows on the display. Press <ENTER> to select. If there is
another programming level, you will see the next option or you will see the selected
value.
· To exit to the previous menu level, press <MENU>.
1. Select ADDRESS.
2. To change the current address, press <ENTER>.
a. Change the starting address (001~512).
b. Press <ENTER>.
1. Select PERSON.
2. To change the current mode, press <ENTER>.
a. Select a DMX mode (PERSON1/PERSON2).
b. Press <ENTER>.
Function
Operation
11
Advertisement
Table of Contents
