Options - A&D HR-250AZ Instruction Manual

Note
The HRA-02, HRA-08 and HRA-09 can not be used at the same time.
HRA-02 USB interface
(Installed in the balance, Applicable OS: Windows 98 OSR2 or later)
Used to transmit the balance weight data (numerical
value only) uni-directionally to a personal computer
via USB.
Can transmit the balance weight data (numerical
value only) directly to application software such as
Microsoft Excel, Word and memo pad.
Driver installation is not necessary.
Note
To perform bi-directional communication using
WinCT or input statistical data or GLP data to a
personal computer,
(AX-USB-9P-EX)
HRA-08 Ethernet interface
Used to connect the balance to a LAN.
The "WinCT-Plus" data communication software is
provided as a standard accessory and can perform the
following.
Acquire data from multiple balances connected to a
LAN.
Control these balances with commands.
Acquire data transmitted from balances.
Example: When pressing the PRINT key of the balance,
data is output and is acquired by the computer.
The stored data can be used with Microsoft Excel (if
installed).
HRA-09 Built-in battery unit (Ni-MH rechargeable battery pack)
Charging time: Approximately 10 hours.
Continuous operation hours: Approximately 8 hours
Note
The charging time depends on the operating
environment. During charging, the balance is not
available for use.
AX-FXi-31 Main unit cover
Main unit protective cover provided as a standard
accessory.

20. OPTIONS

use the USB converter
73
HRA–02 Example of use
HRA–08 Example of use