Weighing; Basic Operation (Gram Mode) - A&D HR-250AZ Instruction Manual

6-1 Basic Operation (Gram Mode)

1 Place a container on the weighing pan, if necessary.
Press the RE-ZERO key to cancel the weight (tare). The
balance displays
depends on the balance model.)
2 Place a sample on the pan or in the container.
3 Wait for the stabilization indicator to turn on. Read the
value.
While the stabilization indicator is on, pressing the PRINT
key will output the weight value, using the RS-232C serial
interface.
Note
Peripheral equipment, that is sold separately , such as a
printer or a personal computer is required.
4 Remove the sample and container from the pan.
Notes
To use other units, press the MODE key and select an
appropriate unit.
Press the SAMPLE key to turn on or off the minimum
weighing value.
When the ON:OFF key is pressed with a container placed
on the weighing pan, the balance displays
weighing is started,

6. WEIGHING

0. 0 000 g. (The decimal point position
0. 0 000 g and
14
Weighing
pan
Container
Sample
Remove the
sample