Statistical Calculation Mode (Example Of Use) - A&D HR-250AZ Instruction Manual

6-6 Statistical Calculation Mode (Example of Use)

Here, as an example of use of the statistical calculation mode, mixing of the multiple formulae such
as medicine is described. The mixing process is recorded using the balance and the printer.
In the example, the HR-250AZ and the AD-8121B (dump print mode) are connected using the RS-232C
serial interface.
6-6-1 Getting Started
Changing the function table
Changes : ●To enable the statistical calculation mode
●To enable "Zero after output"
Enabling the statistical calculation mode
1 Enter the function table menu.
Press and hold the SAMPLE key until
of the function table is displayed, then release the key.
2 Select the application function.
Press the SAMPLE key several times to display
. Then, press the PRINT key to display
1 .
3 Change the application function parameter to "2".
Press the RE-ZERO key to display
Press the PRINT key to confirm the change. After
,
Enabling "Zero after output"
4 Select "Zero after output".
Press the SAMPLE key several times to display
Then, press the PRINT key to display
press the SAMPLE
.
5 Enable "Zero after output".
Press the RE-ZERO key to display
Then, press the PRINT key to confirm the change.
After ,
Returning to the weighing mode
6 Press the CAL key to return to the weighing mode.
is displayed.
key several times
is displayed.
23
Press and hold
Press
several times
.
Press
several times
.
, and
Press
several times
to display
.
Return to
the weighing mode