A&D HR-250AZ Instruction Manual page 56

Title block and end block
When a weight value is recorded as the GLP data, "Title block" and "End block" are inserted at the
beginning and at the end of a group of weight values, in the GLP report.
Note
To output the report to an AD-8121B , use MODE 3 of the AD-8121B.
Operation
1 With the weight data displayed, press and hold the PRINT key until S5tart
The "Title block" is output.
2 The weight data is output according to the parameter setting of the data output mode.
3 Press and hold the PRINT key until recend
type 1
DP format ( of the function table)
When the setting is "info 1":
is displayed. The "End block" is output.
type 1
DP format (
When the setting is "info 2":
With HR-AZ series, the time and
date are added to output data.
54
is displayed.
of the function table)