A&D HR-250AZ Instruction Manual page 62

Entering the volume of a float
The balance displays the set float volume (factory setting: 10.00cm
by using the following keys if necessary.
Available adjustment range is 0.01 to 99.99 cm
(+)key .. The key to increase the value of the digit selected.
RE-ZERO1
MODE (-)key ........ The key to decrease the value of the digit selected.
key ............ The key to select the digit to change the value.
PRINT1
SAMPLE key ........ The key to store the change and return to the density displaying mode.
CAL key ................ The key to cancel the change and return to the density displaying mode.
Proceed to step 5.
Proceed to step 5.
3
). Change the setting value
3 3
, and unit is 0.01 cm
60
.