System Settings - Doro NeoBio 30 Instructions Manual

Functions
Press . Scroll to
1.
Scroll to desired function e.g.
2.
Scroll to desired setting. Press
3.
When the alarm is activated
ALARM
off, a signal will be heard for 45 seconds. �he signal can be turned off with any button. If
SNOOZE
off permanently via the menu or by holding
determined by the set ringer level.
�he handset's ringer signal.
RING SETUP
Melodies 2,3,4... can continue for up to 8 seconds if the call is answered in another phone.
Any of the following warning tones can be disbled, Keytone, low battery and range.
TONE SETUP
�his is explained in the
LANGUAGE
�he text shown in standby mode.
RENAME HS
Show name or time in standby mode.
HS DISPLAY
�he call is answered when the handset is lifted from the base.
AUTO ANSWER
Setting the date/time. �he format of date/time can also be adjusted.
DATE & TIME

System settings

System PIN is 0000 on delivery.
Press . Scroll to
1.
Scroll to desired function. Press
2.
Enter the desired setting. Press
3.
Warning: �o de-register a handset: WARNING, A deregistered handset can not be used with the system.
DELETE HS
�ONE/PULSE, should normally be set to �ONE.
DIAL MODE
RECALL �IME.
FLASH TIME
SHORT
�he code (e.g. 0000) can be changed.
CHANGE PIN
Expanded system (Two or more handsets e.g +1...)
�he call number for internal calls will be shown in the display in standby mode. �he base unit should be
positioned centrally so that the coverage area is roughly equal for all handsets.
Intercom / internal call
Press (right menu button).
1.
If using more than 2 handsets: Enter call number
2.
Transferring calls/Conference between handsets
When an external call is connected;
Press . Scroll to
1.
If using more than 2 handsets: Enter call number
2.
�o transfer: press
3.
. Press
HS SETTINGS
LANGUAGE
.
OK
is activated the alarm will go off again approx. 7 minutes later. �urn the alarm
. Press
BS SETTINGS
.
OK
.
OK
=New Zealand.
LONG
=others incl. UK/AUS.
. Press
INTERCOM OK
, �or conference: hold
L
English
.
OK
. Press .
OK
will be shown in standby mode. When the alarm goes
L
=internal/external.
INT/EXT
.
Connection section
.
OK
MEDIUM
- for the desired handset or press
1 6
.
- for the desired handset or press
1 6
pressed down.
*

down for a few seconds. �he volume is
=�rance/Portugal.
for all.
9
for all.
9