Replacing The Fuse - Yamaha AEROX YQ50 Owner's Manual

Hide thumbs Also See for AEROX YQ50:
Table of Contents

Advertisement

that the breather hose is properly
routed, in good condition, and not
obstructed.
CAUTION:
If the breather hose is positioned in
such a way that the frame is ex-
posed to electrolyte or gas expelled
from the battery, the frame could
suffer structural and external dam-
ages.
PERIODIC MAINTENANCE AND MINOR REPAIR

Replacing the fuse

1
ECA10600
ZAUM0282
1. Fuse
The fuse holder is located behind panel
A. (See page 6-5.)
If the fuse is blown, replace it as fol-
lows.
1. Turn the key to "
electrical circuits.
2. Remove the blown fuse, and then
install a new fuse of the specified
amperage.
Specified fuse:
7.5 A
EAU23501
CAUTION:
Do not use a fuse of a higher amper-
age rating than recommended to
avoid causing extensive damage to
the electrical system and possibly a
fire.
3. Turn the key to "
4. If the fuse immediately blows
" and turn off all
6-20
" and turn on
the electrical circuits to check if the
devices operate.
again, have a Yamaha dealer
check the electrical system.
ECA10640
6

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Aerox yq50l

Table of Contents