Indicator And Warning Lights - Yamaha AEROX YQ50 Owner's Manual

Indicator and warning lights

TEMP
1 2 3
ZAUM0254
1. Turn signal indicator light "
2. High beam indicator light "
3. Oil level warning light " "
Turn signal indicator light "
This indicator light flashes when the
turn signal switch is pushed to the left or
right.
High beam indicator light "
This indicator light comes on when the
high beam of the headlight is switched
on.
Oil level warning light "
This warning light comes on when the
key is in the " " position or when the oil
level in the 2-stroke engine oil tank is
low during operation. If the warning
INSTRUMENT AND CONTROL FUNCTIONS
EAU11002 light comes on during operation, stop
immediately and fill the oil tank with Ya-
malube 2 or equivalent 2-stroke engine
oil of either JASO grade "FC" or ISO
grades "EG-C" or "EG-D". The warning
light should go off after the 2-stroke en-
gine oil tank has been refilled.
NOTE:
If the warning light does not come on
"
when the key is in the " " position or
"
does not go off after the 2-stroke en-
gine oil tank has been refilled, have a
EAU11020 Yamaha dealer check the electrical cir-
"
cuit.
CAUTION:
Do not operate the vehicle until you
EAU11080
know that the engine oil level is suf-
"
ficient.
EAU11180
"
Coolant temperature warning light
"
ZAUM0255
1. Coolant temperature warning light "
This warning light comes on when the
engine overheats. When this occurs,
ECA10010
stop the engine immediately and allow
the engine to cool.
CAUTION:
Do not operate the engine if it is
overheated.
3-2
"
1/2
E
Km / h
TEMP
1
EAU11430
F
3
"
ECA10020