Replacing The Fuse - Yamaha CRYPTON T110C Owner's Manual

PERIODIC MAINTENANCE AND ADJUSTMENT
To install the battery
1. Place the battery in its compart-
ment. NOTICE: Be sure to install
the battery with its terminals
facing backward.
2. Make sure the key is turned
to " ".
3. Connect the positive battery lead
first, then the negative battery
lead.
4. Install the battery box cover by in-
stalling the screw.
5. Close the seat.
6

Replacing the fuse

The fuse holder is located under the
seat. (See page 3-8.)
If the fuse is blown, replace it as fol-
[ECA16590]
lows.
1. Turn the key to "
electrical circuits.
2. Remove the battery box cover by
removing the screw.
1. Battery box cover
2. Screw
3. Remove the blown fuse, and then
install a new fuse of the specified
amperage. WARNING! Do not
use a fuse of a higher amperage
rating than recommended to
EAU47671
" and turn off all
1
2
6-26
avoid causing extensive dam-
age to the electrical system and
possibly a fire.
[EWA15131]
1
1. Fuse
2. Spare fuse
Specified fuse:
10.0 A
4. Turn the key to " " and turn on
the electrical circuits to check if the
devices operate.
5. If the fuse immediately blows
again, have a Yamaha dealer
check the electrical system.
6. Install the battery box cover by in-
stalling the screw.
2