Coolant - Yamaha AEROX YQ50 Owner's Manual

Hide thumbs Also See for AEROX YQ50:
Table of Contents

Advertisement

Coolant

The coolant level should be checked
before each ride. In addition, the cool-
ant must be changed at the intervals
specified in the periodic maintenance
and lubrication chart.
To check the coolant level
1. Place the vehicle on a level sur-
face and hold it in an upright posi-
tion.
NOTE:
G
The coolant level must be checked
on a cold engine since the level
varies with engine temperature.
G
Make sure that the vehicle is posi-
tioned straight up when checking
the coolant level. A slight tilt to the
side can result in a false reading.
2. Check the coolant level through
the check window.
NOTE:
The coolant should be between the
minimum and maximum level marks.
PERIODIC MAINTENANCE AND MINOR REPAIR
EAU20070
1
2
EAUM2100
ZAUM0591
1. Maximum level mark
2. Minimum level mark
3. If the coolant is at or below the
minimum level mark, remove the
cowling A. (See page 6-5.)
4. Open the reservoir cap, and then
add coolant to the maximum level
mark.
1
ZAUM0274
1. Coolant reservoir cap
CAUTION:
G
G
G
Never attempt to remove the radiator
cap when the engine is hot.
6-8
Coolant reservoir capacity:
0.25 L (0.26 US qt) (0.22 Imp.qt)
If coolant is not available, use
distilled water or soft tap water
instead. Do not use hard water
or salt water since it is harmful
to the engine.
If water has been used instead
of coolant, replace it with cool-
ant as soon as possible, other-
wise the engine may not be
sufficiently cooled and the cool-
ing system will not be protected
against frost and corrosion.
If water has been added to the
coolant, have a Yamaha dealer
check the antifreeze content of
the coolant as soon as possible,
otherwise the effectiveness of
the coolant will be reduced.
WARNING
ECA10470
6
EWA10380

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Aerox yq50l

Table of Contents