Transferring A Call; Initiating A Conference Call (Ad-Hoc); Method One (Conference) - Cisco 9951 User Manual

Transferring a call

While on an incoming call press the "Transfer"
your phone. The current caller will be placed on hold. Once a transfer number has been
dialed you can press the "Transfer" button at anytime to transfer the caller.

Initiating a conference call (ad-hoc)

An add-hoc conference call can have several participants and provides the same
functionality as Centrex three-way calling or a six-way conference. The system is limited
to a maximum conference call of 6 users. There are two methods to creating a conference
call. Each method is explained below.

Method One (Conference)

While on a call press the Conference
You will now hear a dial tone and the existing caller
is placed on hold. Dial the number of the person you
wish to conference in to the call.
When the person picks up press the soft key below
the "Conference" option to conference them into the original call or press "Cancel" to
not conference them in. To return to the original
caller if you did not conference in the new caller
press the soft key below "Resume".
This method is the most common method when you
want to add an additional caller into a call.
button located on the bottom right of
button.