Specifications For Optional Power Supply Products; Table 2.4 Specifications For Power Cords Supplied With The Eternus Dx Disk Storage System (For The Emea&I Region); Table 2.5 Specifications For Power Cords Supplied With The Eternus Dx Disk Storage System (For Regions Other Than Emea&I); Table 2.6 Specifications For Optional Power Cords (For Regions Other Than Emea&I) - Fujitsu ETERNUS DX80 S2 User Manual

Chapter 2 ETERNUS DX Disk Storage System Installation
2.6 Outlet/Socket Specifications
2.6.1

Specifications for Optional Power Supply Products

This section explains the specifications of optional power cords and power related optional products.
When using power distribution units, the number of outlets that are required to connect the controller
enclosure and drive enclosures should be taken into consideration.
In addition, make sure that the plug type of the power distribution unit fits the power socket when using an
existing power socket. If the plug type does not fit the power socket, replace the socket.
■
Power cords
●
Power cords supplied with the ETERNUS DX Disk storage system (for the EMEA&I region)
Table 2.4
Used for connection between the
ETERNUS DX Disk storage system
and the socket (IEC60320-C13 ↔
IEC60320-C14G)
●
Power cords supplied with the ETERNUS DX Disk storage system (for regions other than EMEA&I)
Table 2.5
Used for connection between the
ETERNUS DX Disk storage system
and the socket
(IEC60320-C13 ↔
NEMA L6-15P)
●
Optional AC100V and AC200V power cords (for regions other than EMEA&I)
Optional power cords are used to connect devices with the IEC60320-C13 power socket type. These power
cords can be used to connect devices with the AC100V and AC200V specifications.
Table 2.6
Used for connection between the
ETERNUS DX Disk storage system
and the socket
(IEC60320-C13 ↔
IEC 60320-C14)
ETERNUS DX80 S2/DX90 S2 Disk storage system User's Guide -Site Planning-
Specifications for power cords supplied with the ETERNUS DX Disk storage system (for the
EMEA&I region)
Usage Plug type
IEC60320-C14G
Specifications for power cords supplied with the ETERNUS DX Disk storage system (for regions
other than EMEA&I)
Usage Plug type
NEMA L6-15P
Specifications for optional power cords (for regions other than EMEA&I)
Usage Plug type
IEC60320-C14
Copyright 2013 FUJITSU LIMITED
Socket type
IEC60320-C13
Socket type
NEMA L6-15R
Socket type
IEC60320-C13
38
Cable length Remarks
2.5m 250V 10A
Cable length Remarks
4.0m 250V 15A
(Normal usage
<12A)
Cable length Remarks
3.0m 250V 10A
(Normal usage <8A)
P3AM-4822-12ENZ0