Drive Enclosures; Figure 4.6 Installation Diagram For Host Interfaces (Dual-Controller Type); Table 4.4 Priority Order Of Drive Enclosure Installation (For 2.5" Type Controller Enclosure); Table 4.5 Priority Order Of Drive Enclosure Installation (For 3.5" Type Controller Enclosure) - Fujitsu ETERNUS DX80 S2 User Manual

Chapter 4 Rack and Optional Product Installation
4.3 Standard Installation Rules Before Shipment (Only for Regions Other than EMEA&I)
■ For a dual-controller type

Figure 4.6 Installation diagram for host interfaces (dual-controller type)

Port
#0
CA#0
Controller 0 (CM#0)
4.3.2

Drive Enclosures

This section explains the installation rules for drive enclosures. 2.5" type and 3.5" type drive enclosures can be
installed together in the ETERNUS DX Disk storage system.
The priority order of drive enclosure installation varies depending on the controller enclosure type.
■ 2.5" type controller enclosure
Table 4.4 Priority order of drive enclosure installation (for 2.5" type controller enclosure)
Priority order
1
2
■ 3.5" type controller enclosure
Table 4.5 Priority order of drive enclosure installation (for 3.5" type controller enclosure)
Priority order
1
2
For the ETERNUS DX80 S2/DX90 S2, up to nine drive enclosures can be installed.
When only 2.5" type enclosures are used for the ETERNUS DX80 S2, up to four drive enclosures can be
installed.
DE-IDs are automatically assigned for a drive enclosure based on the installation order.
ETERNUS DX80 S2/DX90 S2 Disk storage system User's Guide -Site Planning-
Port Port Port
#1 #0 #1
CA#1
Expansion
Drive enclosure (2.5inch)
Drive enclosure (3.5inch)
Drive enclosure (3.5inch)
Drive enclosure (2.5inch)
Copyright 2013 FUJITSU LIMITED
Port Port Port
#0 #1 #0
CA#0
Controller 1 (CM#1)
Type
Type
71
Port
#1
CA#1
Expansion
P3AM-4822-12ENZ0