Fujitsu fi-65F Operator's Manual page 21

Chapter 2 How to Scan Documents
6
Select a scanner driver.
For some image scanning applications, selection of a scanner driver
may not be needed.
7
Select a scanner.
Make sure to select the scanner model that is connected to the
computer.
For some image scanning applications, selection of a scanner may
not be needed.
8
In the scanner driver's setup dialog box, configure the
scan settings.
For some image scanning applications, the scanner driver's setup
dialog box may not appear.
9
Scan the document with the image scanning application.
ATTENTION
When the scanner is communicating with the computer, for
example during scanning, take note of the following:
Do not unplug the USB cable.
If the USB cable is unplugged and immediately plugged back
again, it may take about two minutes until the computer
recognizes the scanner.
Do not perform an operation that causes disconnection of the
communication between the scanner and the computer, such
as logging off the user account.
TOP
Contents
Index
Introduction
Scanner
Overview
How to Scan
Documents
Configuring the
Scan Settings
Various Ways to
Scan
Daily Care
Troubleshooting
Operational
Settings
Appendix
Glossary
21