Index Introduction; Scanner Cannot Be Powered On; Overview; How To Scan - Fujitsu fi-65F Operator's Manual

Chapter 6 Troubleshooting

Scanner cannot be powered ON.

Are the following cables connected properly?
USB cable
Power cable or USB bus power cable
Yes
Is the computer turned on?
Yes
Is the power LED off?
No
Is the scanner driver installed correctly?
Yes
Connect the following cables properly.
USB cable
No
Power cable or USB bus power cable
For details, refer to "Connecting the Cables" in Getting Started.
Turn on the computer.
No
Press the [Power] or [Scan] button.
Yes
Install the scanner driver correctly.
For details, refer to "Installing the Software" in Getting Started.
No
If the problem persists, check the items in
Service Provider" (page 52)
authorized FUJITSU scanner service provider.
"6.2 Before You Contact the Scanner
first, then contact your FUJITSU scanner dealer or an
TOP
Contents
Index
Introduction
Scanner

Overview

How to Scan

Documents

Configuring the

Scan Settings

Various Ways to

Scan

Daily Care

Troubleshooting

Operational

Settings
Appendix
Glossary
40