Scanning Does Not Start; Index; Introduction; Scanner - Fujitsu fi-65F Operator's Manual

Chapter 6 Troubleshooting

Scanning does not start.

Did you unlock the transport lock switch?
Yes
Is the USB cable connected properly?
Yes
Is the connector on the USB cable broken or damaged?
No
Does scanning start after turning the scanner off then back
on?
No
Turn off the scanner, and unlock the transport lock switch.
For details about how to turn off the scanner, refer to
No
OFF" (page 15).
For details, refer to "Installing the Scanner" in Getting Started.
Connect the USB cable properly.
For details, refer to "Connecting the Cables" in Getting Started.
No
Use a new cable and make sure that it is connected properly.
Yes
The scanner is operating correctly.
Yes
If the problem persists, check the items in
Service Provider" (page 52)
authorized FUJITSU scanner service provider.
"1.3 Turning the Power ON/
"6.2 Before You Contact the Scanner
first, then contact your FUJITSU scanner dealer or an
TOP
Contents

Index

Introduction

Scanner

Overview

How to Scan

Documents

Configuring the

Scan Settings

Various Ways to

Scan

Daily Care

Troubleshooting

Operational

Settings
Appendix
Glossary
42