Navigation Panel; Lan Screen - ZyXEL Communications NBG5615 User Manual

Table 27 Status Screen: Access Point Mode (continued)
LABEL
Interface Status
Interface
Status
Rate

8.4.1 Navigation Panel

Use the menu in the navigation panel to configure NBG5615 features in Access Point Mode.
Figure 42 Menu: Access Point Mode
Refer to Table 26 on page 61

8.5 LAN Screen

Use this section to configure your LAN settings while in Access Point Mode.
Click Network > LAN to see the screen below.
Note: If you change the IP address of the NBG5615 in the screen below, you will need to
log into the NBG5615 again using the new IP address.
NBG5615 User's Guide
DESCRIPTION
This displays the NBG5615 port types. The port types are: LAN and WLAN.
For the LAN ports, this field displays Down (line is down) or Up (line is up or connected).
For the 2.4GHz/5GHz WLAN, it displays Up when the 2.4GHz/5GHz WLAN is enabled or
Down when the 2.4G/5G WLAN is disabled.
For the LAN ports, this displays the port speed and duplex setting or N/A when the line is
disconnected.
For the 2.4GHz/5GHz WLAN, it displays the maximum transmission rate when the 2.4GHz/
5GHz WLAN is enabled and N/A when the WLAN is disabled.
for descriptions of the labels shown in the navigation panel.
Chapter 8 Access Point Mode
69