Wireless Security: Wpa2-Psk - ZyXEL Communications NBG5615 User Manual

Figure 15 Wireless Security: No Security
The following table describes the labels in this screen.
Table 11 Wireless Security: No Security
LABEL
Wireless Radio
Wireless
Network Name
(SSID)
Security Mode
Exit
Back
Next

3.5.2 Wireless Security: WPA2-PSK

Choose WPA2-PSK security in the Wireless Security screen to set up a password for your wireless
network.
NBG5615 User's Guide
DESCRIPTION
Choose whether you want to apply the wireless security to 2.4G Hz or 5G Hz wireless
radio.
Enter a descriptive name (up to 32 printable 7-bit ASCII characters) for the wireless LAN.
If you change this field on the NBG5615, make sure all wireless stations use the same SSID
in order to access the network.
Select a security level from the drop-down list box.
Choose No Security to have no wireless LAN security configured. If you do not enable any
wireless security on your NBG5615, your network is accessible to any wireless networking
device that is within range.
Click this to close the wizard screen without saving.
Click this to return to the previous screen.
Click this to continue.
Chapter 3 Connection Wizard
35