Dhcp Table - ZyXEL Communications NBG5615 User Manual

Chapter 10 Monitor
Figure 46 View Log
You can configure which logs to display in the View Log screen. Go to the Log Setting screen and
select the logs you wish to display. Click Apply to save your settings. Click Cancel to start the
screen afresh.
Figure 47 Log Settings

10.4 DHCP Table

DHCP (Dynamic Host Configuration Protocol, RFC 2131 and RFC 2132) allows individual clients to
obtain TCP/IP configuration at start-up from a server. You can configure the NBG5615's LAN as a
DHCP server or disable it. When configured as a server, the NBG5615 provides the TCP/IP
configuration for the clients. If DHCP service is disabled, you must have another DHCP server on
that network, or else the computer must be manually configured.
Click Monitor > DHCP Table or Configuration > Network > DHCP Server > Client List. Read-
only information here relates to your DHCP status. The DHCP table shows current DHCP client
90
NBG5615 User's Guide