Ftp Screen - ZyXEL Communications NBG5615 User Manual

Chapter 23 USB Media Sharing
Table 76 Management > USB Media Sharing > SAMBA (continued)
LABEL
Enable
User Name
Password
USB1/2
Apply
Cancel

23.7 FTP Screen

Use this screen to set up file sharing via the NBG5615 using FTP and create user accounts. Click
Management > USB Media Sharing > FTP.
Figure 119 Management > USB Media Sharing > FTP
The following table describes the labels in this screen.
Table 77 Management > USB Media Sharing > FTP
LABEL
Enable FTP
Port
User Accounts
#
188
DESCRIPTION
This field displays whether a user account is activated or not. Select the check box to
enable the account. Clear the check box to disable the account.
Enter a user name that will be allowed to access the shared files. You can enter up to 20
characters. Only letters and numbers allowed.
Enter the password used to access the shared files. You can enter up to 20 characters.
Only letters and numbers are allowed. The password is case sensitive.
Select the USB port(s) of the NBG5615. The configured user can access the files on the
USB device(s) connected to the selected USB port(s) only.
Click Apply to save your changes back to the NBG5615.
Click Cancel to begin configuring this screen afresh.
DESCRIPTION
Select this to enable the FTP server on the NBG5615 for file sharing using FTP.
You may change the server port number for FTP if needed, however you must use the
same port number in order to use that service for file sharing.
Before you can share files you need a user account. Configure the following fields to set
up a file-sharing account.
This is the index number of the user account.
NBG5615 User's Guide