ZyXEL Communications NBG5615 User Manual page 122

Chapter 12 Wireless LAN
Figure 68 Network > Wireless LAN 2.4G/5G > MAC Filter
The following table describes the labels in this menu.
Table 44 Network > Wireless LAN 2.4G/5G > MAC Filter
LABEL
SSID Select
MAC Address
Filter
Filter Action
MAC Filter Summary
Set
MAC Address
Apply
Cancel
122
DESCRIPTION
Select the SSID for which you want to configure MAC filtering.
Select to turn on (Enable) or off (Disable) MAC address filtering.
Define the filter action for the list of MAC addresses in the MAC Filter Summary table.
Select Allow to permit access to the NBG5615, MAC addresses not listed will be denied
access to the NBG5615.
Select Deny to block access to the NBG5615, MAC addresses not listed will be allowed to
access the NBG5615.
This is the index number of the MAC address.
Enter the MAC address of the wireless station that are allowed or denied access to the
NBG5615.
Click Apply to save your changes back to the NBG5615.
Click Cancel to reload the previous configuration for this screen.
NBG5615 User's Guide