ZyXEL Communications NBG5615 User Manual page 125

Figure 71 Network > Wireless LAN 2.4G/5G > WPS
The following table describes the labels in this screen.
Table 47 Network > Wireless LAN 2.4G/5G > WPS
LABEL
WPS Setup
WPS
PIN Code
PIN Number
WPS Status
Status
Release
Configuration
802.11 Mode
SSID
Security
NBG5615 User's Guide
DESCRIPTION
Select Enable to turn on the WPS feature. Otherwise, select Disable.
Select Enable and click Apply to allow the PIN Configuration method. If you select
Disable, you cannot create a new PIN number.
This is the WPS PIN (Personal Identification Number) of the NBG5615. Enter this PIN in
the configuration utility of the device you want to connect to the NBG5615 using WPS.
The PIN is not necessary when you use WPS push-button method.
Click Generate to generate a new PIN number.
This displays Configured when the NBG5615 has connected to a wireless network using
WPS or when WPS Enable is selected and wireless or wireless security settings have
been changed. The current wireless and wireless security settings also appear in the
screen.
This displays Unconfigured if WPS is disabled and there are no wireless or wireless
security changes on the NBG5615 or you click Release Configuration to remove the
configured wireless and wireless security settings.
This button is only available when the WPS status displays Configured.
Click this button to remove all configured wireless and wireless security settings for WPS
connections on the NBG5615.
This is the 802.11 mode used. Only compliant WLAN devices can associate with the
NBG5615.
This is the name of the wireless network (the NBG5615's first SSID).
This is the type of wireless security employed by the network.
Chapter 12 Wireless LAN
125