The Auto-Connect Printer List Window - ZyXEL Communications NBG5615 User Manual

The following table describes the labels in this window.
Table 5 ZyXEL NetUSB Share Center Utility Configuration Window
LABEL
Basic
Language
OK
Cancel
Apply

2.2.3 The Auto-Connect Printer List Window

This section describes the utility's auto-connect printer list window. You can open it by clicking the
Tools > Auto-Connect Printer List menu command.
Note: If the computer is connecting to the shared USB printer for the first time, you need
to click Connect and setup the printer before you can use the Auto-Connect
Printer function. See
Figure 6 ZyXEL NetUSB Share Center Utility Auto-Connect Printer List Window
The following table describes the labels in this screen.
Table 6 ZyXEL NetUSB Share Center Utility Auto-Connect Printer List Window
LABEL
Server IP & Printer
Name
Windows Printer Name
Delete
Close
NBG5615 User's Guide
DESCRIPTION
Select this to run the utility automatically when you log into or start up Windows.
Select a language for the ZyXEL NetUSB Share Center Utility. You must restart the
utility for the change to take effect.
Click this to save your changes and close the window.
Click this cancel to close the window without saving.
Click this to save your changes without closing the window.
Chapter 9 on page 84
DESCRIPTION
Displays a list of print server IPs and printer names connected to this NBG5615.
Displays a corresponding list of Windows printer names connected to this devices
listed in the other list.
Select an printer from the list and click this to remove it.
Click this to close the window.
Chapter 2 ZyXEL NetUSB Share Center Utility
for more details.
25