Using The Dvr Player - GE 30 User Manual

Using the DVR player

Use the DVR player to view video clips archived from the TVR 30 on any PC. The DVR
player is automatically included when archiving data from the device. When you
insert the backup media into the PC, the DVR player automatically runs.
Note: If your PC is running on Windows Vista or Windows 7, the DVR player may not
automatically launch. If so, open the backup media by double-clicking the device
drive letter, and then launching the DVR_Player file located in the Player folder.
Figure 16: DVR player
To view archived video using the DVR player:
1. Launch the DVR player.
2. Click Play to display the Data List dialog box.
The Data List dialog box displays a list of all archived video. If you don't see a list,
click Open and browse for the folder containing your archived video.
3. Select an event, and then click Playback to display the Playback screen.
You can select the start time and cameras from which to play video.
4. Click OK to play back video.
To verify that the video has not been altered, select an event, and then click Verify in
the Data List dialog box. The Playback screen displays. If the Status Log reports a
value of Good Signature, then the video has not been altered.
To play back a local file previously saved from the DVR, click Local Playback in the
Playback screen, and then click Open to browse for the local file.
TruVision DVR 30 User Manual
Chapter 4: Basic operation
37