The Livepage - Bosch VIP-X1XF Installation And Operating Manual

VIP X1 XF
6.2

The LIVEPAGE

Once the connection is established, the Web browser displays the LIVEPAGE. It shows the
live video image on the right of the browser window. Depending on the configuration, various
text overlays may be visible on the live video image (see Section 5.13 Advanced Mode: Display
Stamping, page 38).
Other information may be shown next to the live video image on the LIVEPAGE. The display
depends on the settings on the LIVEPAGE Functions page (see Section 5.15 Advanced Mode:
LIVEPAGE Functions, page 41).
Maximum number of connections
If you do not connect, the unit may have reached its maximum number of connections.
Depending on the unit and network configuration, each VIP X1 XF can have up to 25 Web
browser connections or up to 50 connections via Bosch Video Client or Bosch Video
Management System.
Protected VIP X1 XF
If the VIP X1 XF is password protected against unauthorized access, the Web browser
displays a corresponding message and prompts you to enter the password when you attempt
to access protected areas.
NOTICE!
A VIP X1 XF offers the option to limit the extent of access using various authorization levels
(see Section 5.11 Advanced Mode: Password, page 35).
1.
2.
Protected network
If a RADIUS server is employed in the network for managing access rights (802.1x
authentication), the VIP X1 XF must be configured accordingly, otherwise no communication
is possible (see Section Authentication, page 87).
Image selection
You can view the image of the camera in different displays.

Display stamping
Various overlays or "stamps" in the video image provide important status information. The
overlays provide the following information:
Bosch Sicherheitssysteme GmbH
Enter the user name and associated password in the corresponding text fields.
Click OK. If the password is entered correctly, the Web browser displays the page that
was called up.
Click one of the tabs Stream 1, Stream 2 or M-JPEG below the video image to toggle
between the different displays of the camera image.
Decoding error. The frame might show artefacts due to decoding errors. If
subsequent frames reference this corrupted frame, they might also show
decoding errors as well but won't be marked with the "decoding error" icon.
Alarm flag set on media item
Communication error. Any kind of communication error is visualized by this
icon. Cause can be a connection failure to the storage medium, a protocol
violation with a sub component or simply a timeout. An automatic reconnection
procedure is started in the background in order to recover from this error.
Installation and Operating Manual
Operation | en 97
DOC | V4.54 | 2011.09