Bosch VIP-X1XF Installation And Operating Manual page 42

42 en | Configuration using a Web browser
Show relay outputs
Relay outputs are shown next to the video image as icons, along with their assigned names. If
the relay is switched, the icon changes color.
Show VCA trajectories (standard version only)
The trajectories (motion lines of objects) from the video content analysis are displayed in the
live video image if a corresponding analysis type is activated (see Section 5.31 Advanced Mode:
VCA Event triggered, page 72).
Show VCA metadata
When the analysis function is activated, the additional information from the video content
analysis (VCA) will be displayed in the live video image (see Section 5.31 Advanced Mode: VCA
Event triggered, page 72). With the MOTION+ analysis type, for example, the sensor fields in
which motion is recorded will be marked with rectangles.
Show event log
The event messages are displayed along with the date and time in a field next to the video
image.
Show system log
The system messages are displayed along with the date and time in a field next to the video
image and provide information about establishing and ending connections, for example.
Allow snapshots
Here you can specify whether the icon for saving individual images should be displayed below
the live image. Individual images can only be saved if this icon is visible.
Allow local recording
Here you can specify whether the icon for saving video sequences on the local memory should
be displayed below the live image. Video sequences can only be saved if this icon is visible.
Path for JPEG and video files
1.
2.
DOC | V4.54 | 2011.09
Enter the path for the storage location of individual images and video sequences that you
can save from the LIVEPAGE.
If necessary, click Browse to find a suitable directory.
Installation and Operating Manual
VIP X1 XF
Bosch Sicherheitssysteme GmbH