Models Available; Required Accessory; Product Dimensions - GE Monogram ZV850 Installation Instructions Manual

Model
Model
ZV850
Available
ZX858 – For 8 ft. ceiling height.
Required
This kit includes decorative duct covers and
Accessory
support frames to reach an 8 ft ceiling height.
ZX859 – For 9 ft. ceiling height.
This kit includes decorative duct covers and
support frames to reach an 9 ft ceiling height.
The vent hood must be installed 24" min. and
Product
30" max. above the cooking surface. 25-1/2" is
Dimensions
recommended for best venting performance
and to insure that the duct cover meets the
ceiling. The cooking surface should be at least
36" above the floor. Installation will be easier if
the vent hood is installed before the cooktop
and countertop is installed.
This vent hood is designed to be used in
vented ceiling mounted installations.
NOTE: Accessories to meet proper ceiling
height are required to complete the installation.
*25-1/2" Recommended
36" Reference
Design Information
36" Island Vent Hood
ZX8510 – For 10 ft. ceiling height.
This kit includes decorative duct covers and
support frames to reach a 10 ft. ceiling height.
Order the required accessory at the same time
as the vent hood and have on site before
installation.
35-3/8"
*26-1/4" for 8 ft. Ceiling
Using ZX858 Accessory
38-1/8" for 9 ft. Ceiling
Using ZX859 Accessory
50-1/8" for 10 ft. Ceiling
Using ZX8510 Accessory
* The distance between the cooking surface and the bottom of the
hood must be at least 24" and up to 30" The 25-1/2"
recommended installation height, above the standard 36"
countertop, will insure duct cover fit to the ceiling.
*Height
to Ceiling
8-1/4"
27-1/2"
3