Adding A New Profile; Figure 19 Profile: Add New Profile; Table 12 Profile: Add New Profile - ZyXEL Communications G-270S User Manual

Table 11 Profile Screen (continued)
LABEL
Security
Transfer Rate

3.3.1 Adding a New Profile

Follow the steps below to add a new profile.
1 Click Add in the Profile screen. An Add New Profile screen displays as shown next.
Click Next to continue.

Figure 19 Profile: Add New Profile

The following table describes the labels in this screen.

Table 12 Profile: Add New Profile

LABEL
Add New Profile
Profile Name
SSID
Network Type
Next
Exit
Scan Info
Chapter 3 ZyXEL Utility Configuration
DESCRIPTION
This field shows whether data encryption is activated (WEP (WEP or 802.1x),
WPA, WPA-PSK, WPA2, WPA2-PSK) or inactive (DISABLE).
This field displays the transfer speed of the selected profile in megabits per second
(Mbps).
DESCRIPTION
Enter a descriptive name in this field.
Select an available wireless device in the Scan Info table and click Select, or enter
the SSID of the wireless device to which you want to associate in this field
manually. Otherwise, enter Any to have the ZyXEL G-270S associate to or roam
between any infrastructure wireless networks.
Select the Infrastructure radio button to associate to an AP. Select the Ad-Hoc
radio button to associate to a peer computer.
Click Next to go to the next screen.
Click Exit to go back to the previous screen without saving.
This table displays the information of the available wireless networks within the
transmission range.
ZyXEL G-270S User's Guide
45