The Link Info Screen; Figure 16 Station Mode: Link Info; Table 3 Station Mode: Link Info - ZyXEL Communications G210H User Manual

ZyXEL G-210H User's Guide

4.2 The Link Info Screen

When the ZyXEL utility starts, the Link Info screen displays, showing the current
configuration and connection status of your G-210H.

Figure 16 Station Mode: Link Info

The following table describes the labels in this screen.

Table 3 Station Mode: Link Info

LABEL
Wireless Network
Status
Profile Name
Network Name
(SSID)
AP MAC Address
Network Type
Channel
Link Speed
Throughput
Total Transmit
Total Receive
Signal Strength
34
DESCRIPTION
This is the name of the profile you are currently using.
The SSID identifies the wireless network to which a wireless station is associated.
This field displays the name of the wireless device to which the G-210H is
associated.
This field displays the MAC address of the AP or peer computer to which the G-
210H is associated.
This field displays the network type (Infrastructure or Ad-Hoc) of the wireless
network.
This field displays the radio channel the G-210H is currently using.
This field displays the current maximum connection speed in Megabits per second
(Mbps).
This field displays the current data transmission rates in kilobits per second (Kbps).
This field displays the total number of data frames transmitted.
This field displays the total number of data frames received.
The status bar shows the strength of the signal. The signal strength mainly
depends on the antenna output power and the distance between your G-210H and
the AP or peer computer.
Chapter 4 Wireless Station Mode Configuration