Cisco TelePresence System Codec C20 Reference Manual page 80

Cisco TelePresence System Codec C20
Contents Introduction
xCommand Bookings Clear
Clear the current stored list of bookings.
Requires user role: USER
Example:
xCommand Bookings Clear
** end
OK
Codec C20 API Reference Guide TC7.0, JANUARY 2014.
D14869.11
About the API xConfiguration
Boot commands
xCommand Boot
80
xCommand xCommand
Reboot system.
Action: As a default the system restarts after a reboot. By selecting Shutdown, the system will not
restart.
Requires user role: USER
Parameters:
Action: <Restart/Shutdown>
Example:
xCommand Boot
*r BootResult (status=OK):
** end
OK
CUIL reboot request, restarting
Connection closed by foreign host.
API Reference Guide
xStatus Appendices
Copyright © 2010–2014 Cisco Systems, Inc. All rights reserved.