Cisco TelePresence System Codec C20 Reference Manual page 101

Cisco TelePresence System Codec C20
Contents Introduction
xCommand Phonebook Contact Delete
Delete an existing contact from the local phonebook.
ContactId: The unique identifier for the contact. The identifier will be returned by an xCommand
Phonebook Search command. It was also returned when the xCommand Phonebook Contact Add
command was issued to make the contact.
Requires user role: USER
Parameters:
ContactId(r): <S: 0, 255>
Example:
xCommand Phonebook Contact Delete ContactId:localContactId-1
OK
*r PhonebookContactDeleteResult (status=OK):
** end
Codec C20 API Reference Guide TC7.0, JANUARY 2014.
D14869.11
About the API xConfiguration
xCommand Phonebook ContactMethod Add
101
xCommand xCommand
Add contact details for an existing contact in the local phonebook. The command returns the
ContactMethodId, which is a unique string that identifies the contact method; typically the format is
"n".
You can add several contact methods to a contact. Note that only the first contact method will
appear in the Favorites list on the Cisco TelePresence Touch controller. The first contact method
may have been created when issuing the xCommand Phonebook Contact Add command to make
the contact. All contact methods are available in the API, on the web interface and when using the
remote control.
ContactId: The unique identifier for the contact that you want to add a contact method to. The
identifier will be returned by an xCommand Phonebook Search command. It was also returned when
the xCommand Phonebook Contact Add command was issued to make the contact.
Device: Set which type of device to call to.
Number(r): The phone number or address of the contact.
Protocol: Select Auto, SIP, H323 or H320 protocol.
CallRate: Set a call rate.
CallType: Select a call type (audio or video).
Requires user role: USER
Parameters:
ContactId(r): <S: 0, 255>
Device: <Mobile/Other/Telephone/Video>
Number(r): <S: 0, 255>
Protocol: <Auto/H320/H323/SIP>
CallRate: <0..6000>
CallType: <Audio/Video>
Example:
xCommand Phonebook ContactMethod Add ContactId:localContactId-2 Number:54321
Protocol:H323
OK
*r PhonebookContactMethodAddResult (status=OK):
Name: 1
** end
API Reference Guide
xStatus Appendices
Copyright © 2010–2014 Cisco Systems, Inc. All rights reserved.