Cisco TelePresence System Codec C20 Reference Manual page 166

Cisco TelePresence System Codec C20
Contents Introduction
xStatus Security Audit Server Port
Returns information on which syslog server port the audit logs are configured to be sent to.
Value space of the result returned:
<Integer>
Example:
xStatus Security Audit Server Port
*s Security Audit Server Port: 514
** end
Codec C20 API Reference Guide TC7.0, JANUARY 2014.
D14869.11
About the API xConfiguration
SIP status
xStatus SIP
xStatus SIP Proxy [1] Status
xStatus SIP Proxy [1] Address
166
xCommand
Shows the top level overview of the SIP status.
Shows the status of the communication between the endpoint and the SIP Proxy server.
Active: The communication between the endpoint and the SIP Proxy is active.
DNSFailed: The attempt to establish communication to the DNS server failed.
Off: There is no communication between the endpoint and the SIP Proxy.
Timeout: The attempt to establish communication to the SIP Proxy timed out.
UnableTCP: The system is unable to use TCP as the transport method.
UnableTLS: The system is unable to use TLS as the transport method.
Unknown: The status of the communication is not known.
AuthenticationFailed: Wrong user name or password.
Value space of the result returned:
<Active/DNSFailed/Off/Timeout/UnableTCP/UnableTLS/Unknown/AuthenticationFailed>
Example:
xStatus SIP Proxy 1 Status
*s SIP Proxy 1 Status: Active
** end
Shows the address of the SIP Proxy that the system communicates with.
Value space of the result returned:
<String>
Example:
xStatus SIP Proxy 1 Address
*s SIP Proxy 1 Address: "192.0.2.50"
** end
API Reference Guide
xStatus xStatus Appendices
Copyright © 2010–2014 Cisco Systems, Inc. All rights reserved.