Cisco TelePresence System Codec C20 Reference Manual page 127

Cisco TelePresence System Codec C20
Contents Introduction
xStatus Call [n] DeviceType
Indicates whether the remote system is a single endpoint or a MCU. Some Cisco endpoints (EX90,
C40, C60, C90, SX20) have built-in MCU capabilities.
Value space of the result returned:
<Endpoint/MCU>
Example:
xStatus Call DeviceType
*s Call 4 DeviceType: Endpoint
** end
Codec C20 API Reference Guide TC7.0, JANUARY 2014.
D14869.11
About the API xConfiguration
Camera status
xStatus Camera
xStatus Camera [1..1] Connected
xStatus Camera [1..1] HardwareID
xStatus Camera [1..1] Manufacturer
127
xCommand
Shows the top level overview of the camera status.
Shows if the camera is connected or not.
Value space of the result returned:
<True/False>
Example:
xStatus Camera 1 Connected
*s Camera 1 Connected: True
** end
Shows the hardware identity of the camera.
Value space of the result returned:
<String>
Example:
xStatus Camera 1 HardwareID
*s Camera 1 HardwareID: "50000000"
** end
Shows the manufacturer of the camera.
Value space of the result returned:
<String>
Example:
xStatus Camera 1 Manufacturer
*s Camera 1 Manufacturer: "TANDBERG"
** end
API Reference Guide
xStatus xStatus Appendices
Copyright © 2010–2014 Cisco Systems, Inc. All rights reserved.