Cisco TelePresence System Codec C20 Reference Manual page 45

Cisco TelePresence System Codec C20
Contents Introduction
NetworkServices configuration
xConfiguration NetworkServices H323 Mode
Determine whether the system should be able to place and receive H.323 calls or not.
Requires user role: ADMIN
Value space: <Off/On>
Off: Disable the possibility to place and receive H.323 calls.
On: Enable the possibility to place and receive H.323 calls (default).
Example: xConfiguration NetworkServices H323 Mode: On
xConfiguration NetworkServices HTTP Mode
Set the HTTP mode to enable/disable access to the system through a web browser. The web
interface is used for system management, call management such as call transfer, diagnostics and
software uploads.
Requires user role: ADMIN
Value space: <Off/On>
Off: The HTTP protocol is disabled.
On: The HTTP protocol is enabled.
Example: xConfiguration NetworkServices HTTP Mode: On
xConfiguration NetworkServices SIP Mode
Determine whether the system should be able to place and receive SIP calls or not.
Requires user role: ADMIN
Value space: <Off/On>
Off: Disable the possibility to place and receive SIP calls.
On: Enable the possibility to place and receive SIP calls (default).
Example: xConfiguration NetworkServices SIP Mode: On
Codec C20 API Reference Guide TC7.0, JANUARY 2014.
D14869.11
About the API xConfiguration xConfiguration
xConfiguration NetworkServices Telnet Mode
xConfiguration NetworkServices WelcomeText
xConfiguration NetworkServices XMLAPI Mode
45
xCommand
Telnet is a network protocol used on the Internet or Local Area Network (LAN) connections.
Requires user role: ADMIN
Value space: <Off/On>
Off: The Telnet protocol is disabled. This is the factory setting.
On: The Telnet protocol is enabled.
Example: xConfiguration NetworkServices Telnet Mode: Off
Choose which information the user should see when logging on to the codec through Telnet/SSH.
Requires user role: ADMIN
Value space: <Off/On>
Off: The welcome text is: Login successful
On: The welcome text is: Welcome to <system name>; Software version; Software release date;
Login successful.
Example: xConfiguration NetworkServices WelcomeText: On
Enable or disable the video system's XML API. For security reasons this may be disabled. Disabling
the XML API will limit the remote manageability with for example TMS, which no longer will be able
to connect to the video system.
Requires user role: ADMIN
Value space: <Off/On>
Off: The XML API is disabled.
On: The XML API is enabled (default).
Example: xConfiguration NetworkServices XMLAPI Mode: On
API Reference Guide
xStatus Appendices
Copyright © 2010–2014 Cisco Systems, Inc. All rights reserved.