Cisco TelePresence System Codec C20 Reference Manual page 156

Cisco TelePresence System Codec C20
Contents Introduction
xStatus Network 1 IPv4 DHCP ProvisioningDomain
Returns the SIP domain of the VCS provisioning server as assigned by DHCP, provided the
provisioning server address is defined as a vendor encapsulated option in the DHCP server. This
status is used only when xConfiguration Provisioning Mode is VCS.
Value space of the result returned:
<String>
Example:
xStatus Network 1 IPv4 DHCP ProvisioningDomain
*s Network 1 IPv4 DHCP ProvisioningDomain: "1234@company.com"
** end
xStatus Network 1 IPv4 DHCP TftpServer
Returns the IP address or DNS name of the TFTP server (provisioning server) as assigned by
DHCP, provided the DHCP server sets the option 66. This status is used only when xConfiguration
Provisioning Mode is CUCM.
Value space of the result returned:
<String>
Example:
xStatus Network IPv4 DHCP TftpServer
*s Network 1 IPv4 DHCP TftpServerAddress: "192.0.2.0"
*s Network 1 IPv4 DHCP TftpServer: "1234@company.com"
** end
xStatus Network 1 IPv6 Address
Shows the IPv6 address that uniquely identifies this system.
Value space of the result returned:
<String>
Example:
xStatus Network 1 IPv6 Address
*s Network 1 IPv6 Address: ""
** end
Codec C20 API Reference Guide TC7.0, JANUARY 2014.
D14869.11
About the API xConfiguration
xStatus Network 1 IPv6 Gateway
xStatus Network 1 MTU
xStatus Network 1 VLAN Voice VlanId
xStatus Network CDP Platform
156
xCommand
Shows the address of the IPv6 gateway.
Value space of the result returned:
<String>
Example:
xStatus Network 1 IPv6 Gateway
*s Network 1 IPv6 Gateway: ""
** end
Shows the MTU (Maximum Transmission Unit) size for the network.
Value space of the result returned:
<Integer>
Example:
xStatus Network 1 MTU
*s Network 1 MTU: 1500
** end
The feedback shows the VLAN Voice ID; or Off if the VLAN Voice Mode is not enabled.
Value space of the result returned:
<"Off"/"1".."4094">
Example:
xStatus Network 1 VLAN Voice VlanId
*s Network 1 VLAN Voice VlanId: "Off"
** end
Returns the hardware platform name of the switch connected to the endpoint.
Value space of the result returned:
<String>
Example:
xStatus Network CDP Platform
*s Network 1 CDP Platform: "cisco WS-C3750X-48P"
** end
API Reference Guide
xStatus xStatus Appendices
Copyright © 2010–2014 Cisco Systems, Inc. All rights reserved.