Cisco TelePresence System Codec C20 Reference Manual page 145

Cisco TelePresence System Codec C20
Contents Introduction
xStatus ICE Turn Bandwidth
Returns the bandwidth available for the turn server right after xConfiguration SIP Profile 1 Turn
BandwidthProbe is set to On.
Probing failed: Could not obtain information on bandwidth.
Probe Aborted: The probing was canceled because a call started.
Probe Connected: The probing has stared.
Probe progress: Shows the bandwidth at this stage of the test.
Probe stopped with loss: The probing finished, because packet loss was detected. The loss is
shown in kbps.
Probe Completed: The probing completed. The bandwidth result shown in kbps.
Value space of the result returned:
<"Probing failed"/"Probe Aborted"/"Probe Connected"/"Probe progress"/"Probe stopped with
loss: kbps"/"Probe Completed: kbps">
Example:
xStatus ICE Turn Bandwidth
*s ICE Turn Bandwidth: "Probe Completed: 6000kbps"
** end
Codec C20 API Reference Guide TC7.0, JANUARY 2014.
D14869.11
About the API xConfiguration
MediaChannels status
xStatus MediaChannels
xStatus MediaChannels Call [n] IncomingAudioChannel [n] Encryption Status
xStatus MediaChannels Call [n] IncomingAudioChannel [n] Audio Protocol
145
xCommand
Shows the top level overview of the media channel status. The example shows the status for an
ongoing call. The identities of the call and channels are used when querying additional information.
Shows the encryption status on the incoming channel.
Value space of the result returned:
<On/Off>
Example:
xStatus MediaChannels Call 27 IncomingAudioChannel 327 Encryption Status
*s MediaChannels Call 27 IncomingAudioChannel 327 Encryption Status: Off
** end
Shows the audio algorithm for the incoming audio channel.
AACLD: The AAC-LD is an MPEG-4 Low Delay Audio Coder audio compression format.
G722: The G.722 algorithm is an ITU standard.
G7221: The G.722.1 algorithm is a licensed royalty-free ITU-T standard.
G711Mu: The G.711 Mu-law compression algorithm is used in North America and Japan.
G711A: The G.711 A-law compression algorithm is used in Europe and the rest of the world.
G729: The G.729 algorithm is an ITU standard.
G729AB: The G.729 annex A and B is an ITU standard.
Opus: Opus is a lossy audio compression format.
Value space of the result returned:
<AACLD/G722/G7221/G711Mu/G711A/G729/G729AB/Opus>
Example:
xStatus MediaChannels Call 27 IncomingAudioChannel 327 Audio Protocol
*s MediaChannels Call 27 IncomingAudioChannel 327 Audio Protocol: AACLD
** end
API Reference Guide
xStatus xStatus Appendices
Copyright © 2010–2014 Cisco Systems, Inc. All rights reserved.