Front Panel - Classe Audio CA-M400 Owner's Manual

SELECT

Front Panel

1 Standby button & LED indicator
The front panel Standby button will toggle the amplifier between
its fully operational status and a "standby" mode that leaves the am-
plifier "off," yet ready to respond to system commands via any of
the supported control options (e.g., IR input, DC trigger, CAN
Bus, or RS-232).
The current state of the amplifier is indicated by the LED on the
standby button on the front panel. The color of this LED indicates
the following:
• Blue
• Off
Caution! If you see the Channel LED Indicator blinking red,
please disconnect the amplifier from the AC mains
immediately and check that all external connections are
cleanly made and secure. If no fault is immediately
obvious, please call your local, authorized Classé dealer
for assistance.
= standby
= operate (the channel LED will be on, and blue)
13