Specifications - Classe Audio CA-M400 Owner's Manual

Specifications

■ Rated power output
■ Frequency response
■ Phase
■ Signal-to-noise ratio
■ Noise floor FFT
■ THD+noise
(unweighted, 1Vrms/1kHz input, 10Hz–500kHz)
■ Voltage gain
■ Mains voltage
the unit was manufactured; cannot be reset by dealer or user
■ Overall dimensions
For more information, see your Classé dealer, or contact:
Classé Audio
5070 François Cusson
Lachine, Quebec
Canada H8T 1B3
Telephone +1 (514) 636-6384
FAX +1 (514) 636-1428
Internet: http://www.classeaudio.com
400 W/ch continuous rms power @ 8Ω
800 W/ch continuous rms power @ 4Ω
10 Hz to 22 kHz (+0/-0.1 dB)
10 Hz to 155 kHz (+0/-3.0 dB)
(ref. full output, 10Hz–80 kHz)
all peaks under -95 dBV
determined by the needs of country for which
less than -10° (22 kHz)
better than -106 dB
(10Hz–80 kHz)
0.004% @ 8Ω
29.1 dB
See "Dimensions"
27