Scan Setup - Bosch VEZ-400 Series Operation Manual

72 en | On-Screen Display (OSD) Menu
TOUR SETUP
(- CLEAR ID)
1.
2.
3.
4.
7.10

Scan Setup

An Auto scan is a PTZ function that moves the camera from one
position to another position. The camera has a maximum of 8
programmable scans. The speed of Auto Scan can be changed
from 1 to 35 degree/sec. To set up (program) an auto scan:
4
SCAN SETUP
NO.
EDIT
2013.4 | |
Select a tour number.
Select the first item in the list. From here you can:
– Press the button [Tele/Wide] to select a Preset, a
Pattern, a Tour, and/or a Scan in each item.
– Press the button[Tele/Wide] to change the number of
the action.
– Press the button [Near/Far] to change the mode of the
action.
– Press the button [Near/Far] to clear (delete) the action
in each item.
Repeat steps 2 and 3 for additional tours.
Save the settings.
Note: Select the option "Clear" to delete the tour.
From the MAIN MENU, select SCAN SETUP. The screen
SCAN SETUP appears.
AUTDOME 4000 Mini
PTZ Dome
Bosch Security Systems, Inc.