Motion Setup - Bosch VEZ-400 Series Operation Manual

64 en | On-Screen Display (OSD) Menu
GENERAL SETUP
PRESET SPEED
SAVE
BACK
1.
2.
3.
4.
5.
6.
7.
7.6.2

Motion Setup

This menu controls camera settings such as proportional pan/
tilt, auto flip, and over tilt. To set these functions:
1.
2.
2013.4 | |
Select the option "Power-Up Act." The power-up action sets
the function (preset, tour, pattern, and scan) that the
system should perform when the power is cycled or after
an alarm action.
Select the value "On" so that the system will resume its
prior activity after an alarm or a power failure.
Select the option "Turbo Speed." This defines the pan and
tilt speed during manual operation of Pan/Tilt only.
Select the appropriate value: ON or OFF.
Select the option "Preset Speed." This sets the speed when
moving to a predefined preset.
Select the appropriate value:
– Fast
– Normal
– Slow
Save the settings.
From the MAIN MENU, select DOME MOTION. The
submenu DOME MOTION appears.
Select MOTION SETUP. The screen MOTION SETUP
appears.
AUTDOME 4000 Mini
PTZ Dome
Bosch Security Systems, Inc.